大发体育

常州亿创从事精密大发体育娱乐为主的大发体育娱乐型企业

常州亿创能源科技有限公司

示例图片三
网站大发体育 > 行业资讯 > 行业知识

冲压件加工生产中模具和工艺的安全保障

2018-08-15 20:36:12 常州亿创能源科技有限公司 阅读

冲压件加工的质量和精度很大程度上都将取决于它的模具,所以如果模具合格的话,工艺流程没有问题的话,精密冲压件就能符合标准。但大家不要忘了精密冲压件生产过程中,还要重点考虑安全性设计问题。

大发体育The quality and precision of stamping parts depend largely on the mold, so if the mold is qualified and the process flow is not a problem, the precision stamping parts can meet the standard. But don't forget that the safety design needs to be considered in the production of precision stamping parts.

当然主要指的就是精密冲压件模具的安全性问题,首先是结构上的设计,应尽量保证进料、定料、出件、清理废料的方便。而在对于大型精密冲压件加工的时候,如果必须要使操作人员的手入模内作业的话,就要可能减少入模的范围,以及尽可能缩短身体某部位在模内停留的时间,尽量还要配备必要的防护措施和装置。

Of course, it mainly refers to the safety of precision stamping die, first of all, the structural design, should try to ensure the convenience of feeding, fixing, discharging, cleaning waste. For large precision stamping parts, if it is necessary to make the operator's hand into the mold operation, it is possible to reduce the scope of the mold, and as far as possible shorten the body part in the mold stay time, as far as possible with the necessary protective measures and devices.

大发体育在对小型精密冲压件的时候,本来就无需将身体的任意部位接近作业区域,所以更是要严禁这样的做法。在进行冲压件模具拆装的时候,应方便安全,避免有夹手、割手的可能,减少不必要的伤害。

For small precision stamping parts, there is no need to close any part of the body to the working area, so this is strictly prohibited. When disassembling and assembling the stamping die, it should be convenient and safe, avoid the possibility of clamping and cutting hands, and reduce unnecessary damage.

大发体育另外,不允许在加工精密冲压件过程中发生废料或工件飞弹现象,因为这样会影响操作者的注意力,甚至击伤操作者。而且过多和过难的动作也不允许在冲压的时候出现,以免造成危害。

In addition, scrap or workpiece missiles are not allowed to occur in the process of precision stamping, because this will affect the operator's attention, and even injure the operator. And too many and too difficult movements are not allowed to appear when stamping, so as not to cause harm.

大发体育要求作为精密冲压件模具上的各种零件,应有足够的强度及刚度,防止使用过程中损坏和变形,尤其是那些紧固零件要有防松动措施,避免意外伤害操作者。总之,哪怕是很细微的问题都会影响安全,所以都要谨慎。

All kinds of parts on the precision stamping die should have enough strength and stiffness to prevent damage and deformation during use, especially those fastening parts should have anti-loosening measures to avoid accidental injury to operators. In short, even minor problems will affect safety, so be cautious.



标签:   大发体育娱乐 大发体育娱乐厂家 钣金 加工